Almuftah Polymers Gallery

LATEST GROUP NEWS

Recognising the increasing market demand for high-quality polymer storage tanks, Almuftah Group established Almuftah Polymers in 1999. As a pioneer manufacturer and supplier of polymer-based storage solutions, it did not take long for our company to become a leading provider of these products for various residential, commercial, and industrial applicationsIn a short span of time, Almuftah Polymers was able to establish a reputable standing among homeowners, business proprietors, specifiers, architects, and builders alike.

 

Our products are not only known for their aesthetic value, they are also manufactured according to the highest standards in our state-of-the-art manufacturing facility located in Doha’s New Industrial Area. Our rotomould water tanks, for instance, are made from materials that are compliant with U.S. Food and Drug Administration standards, are ISO 9001:2000 certified, and they have also been approved by the U.K.’s Water Regulation Advisory Scheme and by Qatar’s General Organisation for Standards and Metrology. On the other hand, our diesel storage tanks have passed material standards set by Ireland and U.K.’s Oil Firing Technical Association.

 

On top of our popular water and diesel storage tanks, we also offer other products like flower pots, foam-insulated tanks for use as pallets and fish bins, and photoluminescent polymers for use in a number of civil and road safety applications.

 

STANDARDS:

 

ISO 9001:2008 (Quality Management System) 

 

Products

 
Products
  • Rotomould water tanks
  • Diesel tanks
  • Foam-insulated tanks
  • Tanks with stone and marble patterns
  • Flower pots 
  • Photoluminescent resins
  • Road barriers

 

Product Specifications


ROTOMOULD WATER TANKS

SIZES

SPECIFICATIONS

SPECIAL FEATURES

APPROVALS, TEST CERTIFICATES, GUARANTEE

Please refer to downloadable form (Tank Specifications)

Made from linear low density polyethylene  (LLDPE) Grade R 50035S.  This material complies with US and European recommendations and statutory regulations for drinking water tank production.

Dimensional stability and close tolerance achieved by controlled manufacturing process

 

Made from LLDPE, which is approved by the US Food and Drug Administration as safe for contact with potable water

 

Special UV-resistant grade offers excellent weathering resistance in harsh climatic conditions

 

Three layer (white/black/white) construction prevents growth of algae

 

Excellent smooth inner and outer surface finish facilitates easy cleaning

 

Single piece monolithic construction offers no chance of any leakage through joints or other openings

 

High strength-to-weight ratio

 

Threaded lid prevents ingress of dust, dirt and insects (flying/crawling) into the tanks and thus keeps water safe and free from contamination

Approvals:

Water Regulations Advisory Scheme (WRAS)

 

Qatar General Organisation for Standards and Metrology

 

Test Certificates:

According to BS6920:2000 (Accredited Test Laboratories in the UK)

 

Guarantee:

12 years against manufacturing defect

 

DIESEL TANKS

SIZES

SPECIFICATIONS

SPECIAL FEATURES

Available in all sizes

Tanks are made of polyethylene; the material used is mixed with a special additive in order to make the HDPE resistant to diesel's corrosive properties. The material used has passed the OFTEC standards for diesel and fuel oil storage tanks

High notched impact strength

Outstanding ECCR

Excellent thermal resistance

High Stiffness

Fully UV-protected

 

Physical Properties

Property

Test Method

Unit   

Value

Density

ASTM D 1505

g/cm (cube)

0.955

Tensile strength

ASTM D 638

Mpa

21

Elongation at break

ASTM D 638

%

700

Flexural modulus

ASTM D 790

Mpa

689

ESCR

 

 

 


FOAM INSULATED TANKS

SIZES

SPECIFICATIONS

FEATURES

Available in all sizes

Different grades of foam tanks are available: minimum foam, medium foam, maximum foam, and customer thickness requirement of up to 50 mm. The maximum grade is 3-4 mm more in sandwich than the normal solid PE tanks. Without foam the difference between them lies in the extent of foam expansion (foam ratio) or thickness of the foam products. As the thickness of the foam increases, the thermal conductivity decreases. The density of the resulting tank foam will also vary, with the foam of maximum expansion having a large cell size (more air in the foam structure), and therefore lower density.

 

The thermal conducting capacity of PE is reduced by using foam. Hence the heat transfer will be less. This is an important property of foam tanks because it helps to reduce the heat transfer between cold water and the surroundings. The insulated tanks are available in all sizes.

PE Foam increases rigidity and stiffness of moulded tanks. In addition, increased strength is imparted upon the tank through the use of foam instead of solid PE, the insulating properties of foam also have useful applications.

 

Typical applications:

 

a) Pallets

b) Fish Bins

 

TANKS WITH STONE/MARBLE EFFECTS

SIZES/RANGES

SPECIFICATIONS

FEATURES

Available in all sizes and five colours

Made from linear low density polyethylene. With this special material, a marbled or textured appearance is achievable

All five colours contain a high performance additive package with long-term UV stabilisers

 

FLOWER POTS

SIZES/RANGES

SPECIFICATIONS

FEATURES

Available in all sizes and five colours

Made of linear low density polyethylene (LLDPE)

Available in all colours

Available in colours with special designs/effects

 

 

PHOTOLUMINISCENT MATERIAL

DESCRIPTION

APPLICATION

SPECIAL FEATURES

Marine lighting

 

Safety warning lighting

 

Aviation lighting

 

Road Markers

 

Road Barriers

 

Other similar lighting devices

Ideal for applications where lighting is of primary concern. Sample products are those for marine and safety environments like marine buoys, aviation and road markers, safety equipment and road barriers.

Photoluminescent polyethylene

 

Stable and non-reactive

 

Charged by sun, indoor or UV light

 

Long glow duration

.

Services

  • Manufacture and supply of rotomould products 

Downloads
Contact Us


Almuftah Polymers
Address: Polymer Showroom, Salwa Road (Opposite Commercial Bank), P.O. Box 875, Doha, Qatar
Telephone: (+974) 4411-4325; (+974) 4411-4678
Mobile: (+974) 3302-8683
Fax: (+974) 4411-4679
Email: This email address is being protected from spambots. You need JavaScript enabled to view it. This email address is being protected from spambots. You need JavaScript enabled to view it.
Business Hours: 8:00 am to 2:00pm; 4:00 pm to 7:00 pm (Saturdays to Thursdays)

 

Al Muftah Polymer Factory 
Address: New Industrial Area, Zone No. 81, Building No. 74, Street No. 23
Telephone:  (+974)4411-4325
Fax: (+974) 4411-4679
Email:  This email address is being protected from spambots. You need JavaScript enabled to view it.
Business Hours:  8:00 AM to 2:00 PM; 4:00 PM to 7:00 PM (Saturday to Thursday)

Ramadan Hours:
Office: 8:00 AM – 2:00 PM 
Factory: 6:00 AM – 12:00 NM
Salwa Road Showroom: 8:00 AM – 12:30 PM / 8:00 PM – 10:30 PM 

.